Share your SNCF Experience
September 29th, 2022
Go to comments
Please share with us your experience to prepare for the new SNCF 300-710 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Your posts are warmly welcome! Hope you will find useful information here!



Taking forever. No response & not posting our comments as well. We need support from you CFTUT & still all are stranded , waiting for your response.
We are updating some new questions so please check them.
I will only extend the membership after receiving confirmation that the site has been updated with valid questions, as I plan to take the exam soon
@cftut,
You should ensure that updated Questions are vlid as per exam to let people join premium membership
valid or not this site
@cftut still valid or not
Passed 3 days ago. All question are valid & from here. You will get all questions in Part 5 for now, and 1 new drag & drop no matter your location. Wish you all Luck!
Thanks @Cftut!
I just finished my exam and i passed it.
There are around 5 new questions that are not available in the new tart 5 i of them is drag and drop. If u study and have experience you will pass. Gd luck to all
@cftut Please do your best to find the new 5 questions that @Id just mentioned!
And btw all the question in part 5 here were in the exam today !!
@cftut please update. Provide information about exam
Just finished my exam
All the new 10Q in part 5 where in.
Maybe 4-5 new questions, one of them was an easy drag and drop how to configure QoS on FTD.
Best of luck to all
PS. You need to study all the 5 parts to pass because the questions where randomly chosen.
Glad to inform u that i passed my exam today. All questions from cftut except for about 5 new questions + one new drag and drop on QOS FTD like @Moe mentioned. I think if you study all the 5 questions series u should be fine. Best of luck!
Oh i forgot, thanks @cftut
just passed exam, all questions from part 5 and aprox 10 new question, 1 new D&D about qos
Cftut, Please update the questions
Did any one appeared in exam after 12th December? Can anyone confirm if Questions are still valid?
Thankyou.
Hi gays
Today I pass the exam Securing Networks with Cisco Firepower (SNCF)
I found a new question ,this corresponds to Part 5 has new questions
Questions – Part 3
Questions – Part 4
Questions are still valid
good luck.
Are these questions still valid?
An engineer is analyzing a risk report generated by using Cisco Secure Firewall Management Center. The report contains these fields:
•Total Attacks
•Events Requiring Attention
•Hosts Targeted
•Hosts Connected to CnC Servers
Which type of risk report is the engineer analyzing?
hosts
attacks
network
events
An engineer must configure the encrypted visibility engine for a Cisco Secure Firewall Threat Defense device in Cisco Secure Firewall Management Center. The engineer already configured an access control policy. Cisco vulnerability database updates, and the Cisco Success Network. Which two actions must be taken to complete the Secure Firewall Threat Defense device configuration? (Choose two.)
Install a Threat license
Enable encrypted traffic inspection.
Enable Snort 3.
Configure an identity policy
Configure an SSL/TLS policy
An engineer is implementing clustering in Cisco Secure Firewall Management Center. The configuration must ensure that the cluster has a designated control unit node with more resources than the other nodes. What must the engineer Set for the priority value of the node?
value lower than the other units in the cluster
255
value higher than the
An engineer is analyzing a risk report generated by using Cisco Secure Firewall Management Center. The report contains these fields:
•Total Attacks
•Events Requiring Attention
•Hosts Targeted
•Hosts Connected to CnC Servers
Which type of risk report is the engineer analyzing?
hosts
attacks
network
events
An engineer must configure the encrypted visibility engine for a Cisco Secure Firewall Threat Defense device in Cisco Secure Firewall Management Center. The engineer already configured an access control policy. Cisco vulnerability database updates, and the Cisco Success Network. Which two actions must be taken to complete the Secure Firewall Threat Defense device configuration? (Choose two.)
Install a Threat license
Enable encrypted traffic inspection.
Enable Snort 3.
Configure an identity policy
Configure an SSL/TLS policy
An engineer is implementing clustering in Cisco Secure Firewall Management Center. The configuration must ensure that the cluster has a designated control unit node with more resources than the other nodes. What must the engineer Set for the priority value of the node?
value lower than the other units in the cluster
255
value higher than the other units in the cluster
0
Is this site this valid…. sitting the exam tomorrow.
All Testing Centers have rescheduled all booked slots. Are they changing the exam?
Thanks CFTUT. all items here are still valid.. passed the exam.
Thanks @CFTUT.
I passed the exam today.
Hi to all,
i’ve passed the exam Jenuary, 29th.
all the items are still valid.
thank to cftut
Cleared the exam
last week
around 15 new questions
rest were from all parts 1 to 5
mentioned below are the new questions – which i could remember
Q1:
Check BGP route advertisment to upstream router cmd in FTD
Q2:
Secondary Static route cmd in FTD
Q3:
Span port configuration cmd on a switch (both source and destination ports were same in the choices and it was the only one which was making sense- because other options had wrong cmds
Q4:
new snipt – drag n drop – complete the pcap output result of a traceroute capture.
Q5:
wireshark output – client not being about to connect with a HTTP server – wiresharkout had tcp ACK output (with options like allow the FTD inside to allow ACk traffic or outside interface)
Q6:
suspicious website URL reputation setting in ACP URL filtering – suspicious / malware url reputation (options – questinable, untrusted etc)
Q7:
email report to mgmt about 24hr record of my configration changes on FTD – Cisco FMC FTD Configuration changes report —- answer Change Reconciliation.
Q8:
server is sending TCP rest to client over the internet – tell where to start the pcap on FTD to troubleshoot (server in DMZ interface, upstream router – outside interface,
Hi Team, Could you please confirm whether there have been any new questions added to the exam ? I would appreciate it if you could update the new questions for practice. Thanks.
update would be nice
Please update questions
Thank you
@cftut,
if there is new questions, please update.
Hello, just passed the exam. All in all, dumps are still valid.
Forgive my adhd brain, I already forgot the newer questions I encountered during the exam even though there are only few of them. Questions presented by @OnePiece were the first set of questions I saw. Most of them are drag and drop. Definitely helpful as well as Part 5.
Q6: suspicious website URL reputation setting in ACP URL filtering – Untrusted (confirm this on Talos website for reputation)
I’ve also noticed a few outdated questions are still included (e.g. EIGRP moved from flexconfig to native route config, etc.) GL test takers.
If there is new questions, please update. Thank you
I failed the exam yesterday, and I saw several new questions—at least 10! Do you know how often the new question pool is updated?
Passed about 10 new questions @OnePiece was right on it, 61 questions you must know all 1-5 sections. If you can score 95% or higher the new question your bound to get a couple right and pass. Good luck see you again in 3 years
I passed the certification today thanks to cftut, 61 questions, at least 5-7 new questions.
There is new questions from 2 week ago, please update
Passed the exam, thanks CFtut team. There were a few new questions approx 7 new one , but make sure you prepare all the questions from Part 1 to Part 5 to pass.
I Fail the exam…. I found more than 15 new questions.
please update the question
I remember this one
A network administrator Sees ad attempt Attack from a specific IP address into cisco firepower manager Center Which Cisco Security tool Must Be Used directly from the Secure firewall Management Center web page to Find Out more information about the ip address
another one
a security analyst is investigating a potential compromise in the network. the security analyst must produce a report for the suspicious activity from cisco secure firewall management center
another one
what acts as the remediation module for rapid threat containment within cisco secure firewall management center
Pass the exam today! About 7 new questions – 1 drag&drop. Questions from 1 to 5 part.
Hi, cftut, can you tell if the site has been updated with a valid questions?